| |
| Alloy |
Temper |
Thickness (mm) |
Width (mm) |
Length (mm) |
| 1100/1050/1200 |
F/M |
5.00-70.0 |
1000-1500 |
1000-5500 |
| 3003 |
F/M |
5.00-70.0 |
1000-1500 |
1000-5500 |
| 5052/5086 |
F/M |
5.00-70.0 |
1000-1500 |
1000-5500 |
| 6351/6061 |
F/M/T4/T6 |
5.00-70.0 |
1000-1500 |
1000-5500 |
|
| |
Thickness Tolerance |
| Specified Thickness (mm) |
Tolerance (± mm) |
| Over |
Thru |
Upto |
Over |
| 1000mm Width |
1000 mm Wdth |
| 5 |
6.3 |
0.24 |
0.32 |
| 6.3 |
8 |
0.32 |
0.4 |
| 8 |
10 |
0.44 |
0.46 |
| 10 |
16 |
0.6 |
0.6 |
| 16 |
25 |
0.8 |
0.8 |
| 25 |
40 |
1 |
1 |
| 40 |
60 |
1.4 |
1.4 |
| 60 |
80 |
2 |
2 |
|
| |
Chemical Composition % |
| Alloy |
Si |
Fe |
Cu |
Min |
Mg |
Cr |
Zn |
Ti |
Al |
| 1050 |
0.25 max. |
0.40 max. |
0.05 max. |
0.05 max. |
0.05 max. |
- |
0.05 max. |
0.03 max. |
99.50 min. |
| 1100 |
0.95 max. |
0.95 max. |
0.05-0.20 |
0.05 max. |
- |
- |
0.10 max. |
- |
99.00 min. |
| 1200 |
1.00 max. |
1.00 max. |
0.05 max. |
0.05 max. |
- |
- |
0.10 max. |
0.05 max. |
99 mion. |
| 3003 |
0.6 max. |
0.7 max. |
0.05-0.20 |
1.0-1.5 |
- |
- |
0.10 max. |
- |
Rem. |
| 5052 |
0.25 max. |
0.40 max. |
0.10 max. |
0.10 max. |
2.2-2.8 |
0.15-0.35 |
0.10 max. |
- |
Rem. |
| 5086 |
0.40 max. |
0.50 max. |
0.10 max. |
0.2-0.7 |
3.5-4.50 |
0.05-0.25 |
0.25 max. |
0.15 max. |
Rem. |
| 6061 |
0.40-0.8 |
0.7 max. |
0.15-0.40 |
0.15 max. |
0.8-1.2 |
0.04-0.35 |
0.25 max. |
0.15 max. |
Rem. |
| 6351 |
0.7-1.3 |
0.50 max. |
0.10 max. |
0.40 -0.8 |
0.40-0.8 |
- |
0.20 max. |
0.2 Max. |
Rem. |
|
| |
| Packaging |
| Wooden Pallet with Edge Protector |
| |
| Hot Rolled Plates in specification other than those mentioned can also be supplied subject to confirmation |
| |
| Back |
Top |
| |
